Stopwatch.ino
// Author:Frankie.Chu
// Date:9 April,2012
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
//
// Modified record:
//
/*******************************************************************************/
#include <EEPROM.h>
#include "TimerOne.h"
#include <avr/pgmspace.h>
#include "TM1637.h"
#define ON 1
#define OFF 0
int8_t TimeDisp[] = {0x00,0x00,0x00,0x00};
unsigned char ClockPoint = 1;
unsigned char Update;
unsigned char microsecond_10 = 0;
unsigned char second;
unsigned char _microsecond_10 = 0;
unsigned char _second;
unsigned int eepromaddr;
boolean Flag_ReadTime;
#define CLK 2//pins definitions for TM1637 and can be changed to other ports
#define DIO 3
TM1637 tm1637(CLK,DIO);
void setup()
{
Serial.begin(9600);
tm1637.set(BRIGHT_TYPICAL);//BRIGHT_TYPICAL = 2,BRIGHT_DARKEST = 0,BRIGHTEST = 7;
tm1637.init();
Timer1.initialize(10000);//timing for 10ms
Timer1.attachInterrupt(TimingISR);//declare the interrupt serve routine:TimingISR
Serial.println("Please send command to control the stopwatch:");
Serial.println("S - start");
Serial.println("P - pause");
Serial.println("L - list the time");
Serial.println("W - write the time to EEPROM ");
Serial.println("R - reset");
}
void loop()
{
char command;
command = Serial.read();
switch(command)
{
case 'S':stopwatchStart();Serial.println("Start timing...");break;
case 'P':stopwatchPause();Serial.println("Stopwatch was paused");break;
case 'L':readTime();break;
case 'W':saveTime();Serial.println("Save the time");break;
case 'R':stopwatchReset();Serial.println("Stopwatch was reset");break;
default:break;
}
if(Update == ON)
{
TimeUpdate();
tm1637.display(TimeDisp);
}
}
//************************************************
void TimingISR()
{
microsecond_10 ++;
Update = ON;
if(microsecond_10 == 100){
second ++;
if(second == 60)
{
second = 0;
}
microsecond_10 = 0;
}
ClockPoint = (~ClockPoint) & 0x01;
if(Flag_ReadTime == 0)
{
_microsecond_10 = microsecond_10;
_second = second;
}
}
void TimeUpdate(void)
{
if(ClockPoint)tm1637.point(POINT_ON);//POINT_ON = 1,POINT_OFF = 0;
else tm1637.point(POINT_ON);
TimeDisp[2] = _microsecond_10 / 10;
TimeDisp[3] = _microsecond_10 % 10;
TimeDisp[0] = _second / 10;
TimeDisp[1] = _second % 10;
Update = OFF;
}
void stopwatchStart()//timer1 on
{
Flag_ReadTime = 0;
TCCR1B |= Timer1.clockSelectBits;
}
void stopwatchPause()//timer1 off if [CS12 CS11 CS10] is [0 0 0].
{
TCCR1B &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12));
}
void stopwatchReset()
{
stopwatchPause();
Flag_ReadTime = 0;
_microsecond_10 = 0;
_second = 0;
microsecond_10 = 0;
second = 0;
Update = ON;
}
void saveTime()
{
EEPROM.write(eepromaddr ++,microsecond_10);
EEPROM.write(eepromaddr ++,second);
}
void readTime()
{
Flag_ReadTime = 1;
if(eepromaddr == 0)
{
Serial.println("The time had been read");
_microsecond_10 = 0;
_second = 0;
}
else{
_second = EEPROM.read(-- eepromaddr);
_microsecond_10 = EEPROM.read(-- eepromaddr);
Serial.println("List the time");
}
Update = ON;
}
'Study > Arduino' 카테고리의 다른 글
ADC Value 를 FND로 출력 (0) | 2014.09.15 |
---|---|
FND Number Count (0) | 2014.09.15 |
Grove-LCD RGB Backlight header file (0) | 2014.09.15 |
SW체터링 소프트웨어적 해결 (0) | 2014.09.05 |
Arduino LED Control (0) | 2014.09.02 |